Parker Hannifin   
home  |  products  |  how to buy  |  support & downloads  |  literature  |  search

Compumotor Division, North America:  Home > Literature > Catalog

Compumotor Product Photo
Linearserv

High Precision, Direct Drive Linear Servo Systems

The Linearserv is a direct drive linear actuator servo systems. Each complete system consists of a brushless linear servo motor, microprocessor-based servo drive with integrated power supply, precision linear guide with rugged square rail bearings and an optical linear encoder for servo feedback.

The primary benefit of the Linearserv system is the simplicity of the design. The Linearserv provides precise linear motion without belts and pulleys, gearboxes, leadscrews or other rotary-to-linear conversion devices that introduce inaccuracies and system complexities.

The performance difference between the LM1000 and LM5000 Series are maximum force, positional accuracy, maximum speed, encoder resolution and repeatability.

Linearserv Drive Features

  • Two input power range versions
    • 100115VAC or
    • 200230VAC
  • Compatible with all Compumotor controllers
    • Step-and-direction input for position mode
    • 10VDC analog input for velocity mode
    • 8VDC analog input for force mode
  • Seven segment LED for drive status and system diagnostics
  • Internal mechanical resonance filter
  • Can operate in Class 10 clean room applications with proper preparation
  • Smooth linear motion at slow speeds
  • Ability to operate in position, velocity or force control mode

LM1000 Series

  • Three motor sizes available:
    • LM1050 provides 50 N of maximum linear force
    • LM1100 provides 100 N of maximum linear force
    • LM1300 provides 300 N of maximum linear force
  • Linear stroke lengths from 50 mm to 1,500 mm
  • Standard speeds up to 0.83 m/s
  • Positional repeatability of 0.5 m
  • Positional accuracy of 10 m
  • Encoder resolution of 0.5 m
  • Ultra precision version improves repeatability and resolution by a factor of 5
  • High rigidity models are available for increased load and moment capabilities

LM5000 Series

  • Three motor sizes available:
    • LM5040 provides 40 N of maximum linear force
    • LM5090 provides 90 N of maximum linear force
    • LM5270 provides 270 N of maximum linear force
  • Linear stroke lengths from 50 mm to 1,500 mm
  • Standard speeds up to 2 m/s
  • Positional repeatability of 1.0 m
  • Positional accuracy of 50 +(50/1,000) * L s [m]
    • (Ls = stroke length in mm)
  • Encoder resolution of 1.0 m
  • High rigidity models are available for increased load and moment capabilities

Additional References


Parker Hannifin Corporation, Compumotor Division, 5500 Business Park Drive, Rohnert Park, CA 94928
707-584-7558 or 800-358-9068
Email: Technical Support
 
Privacy Policy
 
Copyright Parker Hannifin Corporation 2003
--e